An overview of the application of agricultural waste in CO₂ adsorption for environmental protection
Document Type : Research Paper
Authors
- 1 Department of Chemical Engineering, Sahand University of Technology, Tabriz, Iran
- 2 Department of Polymer Engineering, Urmia University, Urmia, Iran
Abstract
Emissions of greenhouse gases, including carbon dioxide, harm the environment. Therefore, many international researchers are concerned about the use of fossil fuels. So, to prevent further irreversible climate change, it is necessary to reduce the temperature and CO2 emissions by 2050. For this purpose, agricultural wastes are very effective and economical sources as one of the methods of CO2 capture. The main objective of this research was to investigate the role of agricultural wastes in carbon dioxide capture and the factors affecting their performance with the aim of protecting the environment. The present research is of the type of applied research and analytical-descriptive in terms of research method. The findings showed that agricultural wastes (biomass) like bamboo wastes, olive stones, peanut shells, walnut shells, sugarcane bagasse, cottonwood, rice straw, and coffee grounds are effective in CO2 capturing. they are also inexpensive and non-toxic, and show an adsorption capacity of up to 21 mmol/g and a surface area of up to 3900 m2/g. while petroleum or coal-based adsorbents have an adsorption capacity of about 160-900 mg/g and a surface area between 850-3800 m2/g.
Keywords
Subjects
Abraha, Y. W., Tsai, C.-W., & Langner, E. H. (2023). Scalable synthesis of mixed-linker (Zn) ZIFs and their application in CO2 adsorption and fixation. Journal of Porous Materials, 30(1), 149-162. DOI: https://doi.org/10.1007/s10934-022-01326-x
Alabadi, A., Razzaque, S., Yang, Y., Chen, S., & Tan, B. (2015). Highly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity. Chemical Engineering Journal, 281, 606-612. DOI: https://doi.org/10.1016/j.cej.2015.06.032
Alie, C. (2004). CO 2 capture with MEA: integrating the absorption process and steam cycle of an existing coal-fired power plant. University of Waterloo,
Alonso, M., Rodríguez, N., González, B., Grasa, G., Murillo, R., & Abanades, J. (2010). Carbon dioxide capture from combustion flue gases with a calcium oxide chemical loop. Experimental results and process development. International Journal of Greenhouse Gas Control, 4(2), 167-173. DOI: https://doi.org/10.1016/j.ijggc.2009.10.004
Arami-Niya, A., Wan Daud, W. M. A., S. Mjalli, F., Abnisa, F., & Shafeeyan, M. S. (2012). Production of microporous palm shell based activated carbon for methane adsorption: Modeling and optimization using response surface methodology. Chemical Engineering Research and Design, 90(6), 776-784. DOI: https://doi.org/10.1016/j.cherd.2011.10.001
Asadi-Sangachini, Z., Galangash, M. M., Younesi, H., & Nowrouzi, M. (2019). The feasibility of cost-effective manufacturing of activated carbon derived from walnut shells for large-scale CO 2 capture. Environmental Science and Pollution Research, 26, 26542-26552. DOI: https://doi.org/10.1007/s11356-019-05842-3
Azimi, B., Tahmasebpoor, M., Sanchez-Jimenez, P. E., Perejon, A., & Valverde, J. M. (2019). Multicycle CO2 capture activity and fluidizability of Al-based synthesized CaO sorbents. Chemical Engineering Journal, 358, 679-690. DOI: https://doi.org/10.1016/j.cej.2018.10.061
Bhuvaneshwari, S., Hettiarachchi, H., & Meegoda, J. N. (2019). Crop Residue Burning in India: Policy Challenges and Potential Solutions. International Journal of Environmental Research and Public Health, 16(5), 832. Retrieved from https://www.mdpi.com/1660-4601/16/5/832
Boonprasop, S., Chalermsinsuwan, B., & Piumsomboon, P. (2017). Effect of the operating parameters on the CO2 capture capacity of potassium carbonate supported on gamma alumina (K2CO3/γ-Al2O3) using conventional heat regeneration. Journal of the Taiwan Institute of Chemical Engineers, 78, 282-289. DOI: https://doi.org/10.1016/j.jtice.2017.06.016
Boyjoo, Y., Cheng, Y., Zhong, H., Tian, H., Pan, J., Pareek, V. K., Lamonier, J.-F., Jaroniec, M., & Liu, J. (2017). From waste Coca Cola® to activated carbons with impressive capabilities for CO2 adsorption and supercapacitors. Carbon, 116, 490-499. DOI: https://doi.org/10.1016/j.carbon.2017.02.030
Chand, S., Pal, A., Saha, R., Das, P., Sahoo, R., Chattaraj, P. K., & Das, M. C. (2020). Two closely related Zn (II)-MOFs for their large difference in CO2 uptake capacities and selective CO2 sorption. Inorganic Chemistry, 59(10), 7056-7066. DOI: https://doi.org/10.1021/acs.inorgchem.0c00551
Chen, J., Moon, H. J., Kim, K. I., Choi, J. I., Narayanan, P., Sakwa-Novak, M. A., Jones, C. W., & Jang, S. S. (2023). Distribution and Transport of CO2 in Hyperbranched Poly(ethylenimine)-Loaded MCM-41: A Molecular Dynamics Simulation Approach. ACS Applied Materials & Interfaces, 15(37), 43678-43690. DOI: https://doi.org/10.1021/acsami.3c07040
Choi, S., Drese, J. H., & Jones, C. W. (2009). Adsorbent materials for carbon dioxide capture from large anthropogenic point sources. ChemSusChem: Chemistry & Sustainability Energy & Materials, 2(9), 796-854. DOI: https://doi.org/10.1002/cssc.200900036
Creamer, A. E., Gao, B., & Wang, S. (2016). Carbon dioxide capture using various metal oxyhydroxide–biochar composites. Chemical Engineering Journal, 283, 826-832. DOI: https://doi.org/10.1016/j.cej.2015.08.037
Crini, G., Lichtfouse, E., Wilson, L. D., & Morin-Crini, N. (2019). Conventional and non-conventional adsorbents for wastewater treatment. Environmental Chemistry Letters, 17, 195-213. DOI: https://doi.org/10.1007/s10311-018-0786-8
Demessence, A., D’Alessandro, D. M., Foo, M. L., & Long, J. R. (2009). Strong CO2 binding in a water-stable, triazolate-bridged metal− organic framework functionalized with ethylenediamine. Journal of the American Chemical Society, 131(25), 8784-8786. DOI: https://doi.org/10.1021/ja903411w
Deng, S., Hu, B., Chen, T., Wang, B., Huang, J., Wang, Y., & Yu, G. (2015). Activated carbons prepared from peanut shell and sunflower seed shell for high CO 2 adsorption. Adsorption, 21, 125-133. DOI: https://doi.org/10.1007/s10450-015-9655-y
Dlugokencky, E., Crotwell, A., Masarie, K., White, J., Lang, P., & Crotwell, M. (2013). NOAA measurements of long-lived greenhouse gases. Asia-Pacific GAW greenhouse gases, 6(6-9), 5.
Du, J., Liu, L., Zhang, L., Yu, Y., Zhang, Y., & Chen, A. (2017). Waste chrysanthemum tea derived hierarchically porous carbon for CO2 capture. Journal of Renewable and Sustainable Energy, 9(6). DOI: https://doi.org/10.1063/1.5005867
Ello, A. S., de Souza, L. K., Trokourey, A., & Jaroniec, M. (2013). Development of microporous carbons for CO2 capture by KOH activation of African palm shells. Journal of CO2 Utilization, 2, 35-38. DOI: https://doi.org/10.1016/j.jcou.2013.07.003
Emara, M. M., Farag, R. S., Mubarak, M. F., & Ali, S. K. (2020). Synthesis of core–shell activated carbon/CaO composite from Ficus Nitida leaves, as an efficient adsorbent for removal of methylene blue. Nanotechnology for Environmental Engineering, 5, 1-14. DOI: https://doi.org/10.1007/s41204-020-00088-8
Esfandian, H., Taheri, A. H., Eshkalak, S. K., & Katal, R. (2022). Application of Adsorbents Prepared from Waste for the Removal of Heavy Metals from Water and Wastewater. In Handbook of Solid Waste Management: Sustainability through Circular Economy (pp. 1927-1950): Springer.
Guo, Y., Tan, C., Sun, J., Li, W., Zhang, J., & Zhao, C. (2020). Biomass ash stabilized MgO adsorbents for CO2 capture application. Fuel, 259, 116298. DOI: https://doi.org/10.1016/j.fuel.2019.116298
Guo, Y., Tan, C., Wang, P., Sun, J., Yan, J., Li, W., Zhao, C., & Lu, P. (2019). Kinetic study on CO2 adsorption behaviors of amine-modified co-firing fly ash. Journal of the Taiwan Institute of Chemical Engineers, 96, 374-381. DOI: https://doi.org/10.1016/j.jtice.2018.12.003
Hamda, A. S., Abo, L. D., Jayakumar, M., Selvakumar, K. V., Periyasamy, S., & Emana, A. N. (2023). Introduction: Growth of Agricultural Waste, Its Disposal, and Related Environmental Issues. In Agricultural Waste to Value-Added Products: Technical, Economic and Sustainable Aspects (pp. 1-19): Springer.
Hayashi, K., Ono, K., Kajiura, M., Sudo, S., Yonemura, S., Fushimi, A., Saitoh, K., Fujitani, Y., & Tanabe, K. (2014). Trace gas and particle emissions from open burning of three cereal crop residues: Increase in residue moistness enhances emissions of carbon monoxide, methane, and particulate organic carbon. Atmospheric Environment, 95, 36-44. DOI: https://doi.org/10.1016/j.atmosenv.2014.06.023
He, S., Chen, G., Xiao, H., Shi, G., Ruan, C., Ma, Y., Dai, H., Yuan, B., Chen, X., & Yang, X. (2021). Facile preparation of N-doped activated carbon produced from rice husk for CO2 capture. Journal of colloid and interface science, 582, 90-101. DOI: https://doi.org/10.1016/j.jcis.2020.08.021
Herzog, H. J., Drake, E. M., & Adams, E. E. (1997). CO2 capture, reuse, and storage technologies for mitigating global climate change: A White Paper, Final Report: Energy Laboratory, Massachusetts Institute of Technology.
Hidayu, A., & Mudz, N. (2016). Preparation and characterization of impregnated activated carbon from palm kernel shell and coconut shell for CO2 capture. Procedia Engineering, 148, 106-113. DOI: https://doi.org/10.1016/j.proeng.2016.06.463
Hu, Y., Liu, X., Zhou, Z., Liu, W., & Xu, M. (2017). Pelletization of MgO-based sorbents for intermediate temperature CO2 capture. Fuel, 187, 328-337. DOI: https://doi.org/10.1016/j.fuel.2016.09.066
Huang, G.-g., Liu, Y.-f., Wu, X.-x., & Cai, J.-j. (2019). Activated carbons prepared by the KOH activation of a hydrochar from garlic peel and their CO2 adsorption performance. New Carbon Materials, 34(3), 247-257. DOI: https://doi.org/10.1016/S1872-5805(19)60014-4
Huang, Y.-F., Chiueh, P.-T., Shih, C.-H., Lo, S.-L., Sun, L., Zhong, Y., & Qiu, C. (2015). Microwave pyrolysis of rice straw to produce biochar as an adsorbent for CO2 capture. Energy, 84, 75-82. DOI: https://doi.org/10.1016/j.energy.2015.02.026
Idrees, M., Rangari, V., & Jeelani, S. (2018). Sustainable packaging waste-derived activated carbon for carbon dioxide capture. Journal of CO2 Utilization, 26, 380-387. DOI: https://doi.org/10.1016/j.jcou.2018.05.016
Indira, V., & Abhitha, K. (2021). A review on polymer based adsorbents for CO2 capture. Paper presented at the IOP Conference Series: Materials Science and Engineering.
Ji, G., & Zhao, M. (2017). Membrane separation technology in carbon capture. Recent advances in carbon capture and storage, 59-90. DOI: https://dx.doi.org/10.5772/62966
Khouzani, M. R. Z., & Ghahfarokhi, Z. D. (2022). Evaluation of agricultural waste management mechanism in Iran. Industrial and Domestic Waste Management, 2(2), 113-124.
Kirbiyik, C. (2019). Modification of biomass-derived activated carbon with magnetic $\alpha $-Fe $ _ {2} $ O $ _ {3} $ nanoparticles for CO $ _ {2} $ and CH $ _ {4} $ adsorption. Turkish Journal of Chemistry, 43(2), 687-704. DOI: https://doi.org/10.3906/kim-1810-32
Koul, B., Yakoob, M., & Shah, M. P. (2022). Agricultural waste management strategies for environmental sustainability. Environmental Research, 206, 112285. DOI: https://doi.org/10.1016/j.envres.2021.112285
Kumar, P., Barrett, D. M., Delwiche, M. J., & Stroeve, P. (2009). Methods for pretreatment of lignocellulosic biomass for efficient hydrolysis and biofuel production. Industrial & Engineering Chemistry Research, 48(8), 3713-3729.
Kumar, S., Srivastava, R., & Koh, J. (2020). Utilization of zeolites as CO2 capturing agents: Advances and future perspectives. Journal of CO2 Utilization, 41, 101251. DOI: https://doi.org/10.1016/j.jcou.2020.101251
Kwon, S., Kwon, H. J., Choi, J. I., Kim, K. C., Seo, J. G., Park, J. E., You, S. J., Park, E. D., Jang, S. S., & Lee, H. C. (2017). Enhanced selectivity for CO2 adsorption on mesoporous silica with alkali metal halide due to electrostatic field: A molecular simulation approach. ACS applied materials & interfaces, 9(37), 31683-31690. DOI: https://doi.org/10.1021/acsami.7b04508
Leung, D. Y., Caramanna, G., & Maroto-Valer, M. M. (2014). An overview of current status of carbon dioxide capture and storage technologies. Renewable and sustainable energy reviews, 39, 426-443. DOI: https://doi.org/10.1016/j.rser.2014.07.093
Lewis, W. K., & Whitman, W. G. (1924). Principles of Gas Absorption. Industrial & Engineering Chemistry, 16(12), 1215-1220. DOI: https://doi.org/10.1021/ie50180a002
Li, J., Michalkiewicz, B., Min, J., Ma, C., Chen, X., Gong, J., Mijowska, E., & Tang, T. (2019). Selective preparation of biomass-derived porous carbon with controllable pore sizes toward highly efficient CO2 capture. Chemical Engineering Journal, 360, 250-259. DOI: https://doi.org/10.1016/j.cej.2018.11.204
Li, K., Tian, S., Jiang, J., Wang, J., Chen, X., & Yan, F. (2016). Pine cone shell-based activated carbon used for CO 2 adsorption. Journal of materials chemistry A, 4(14), 5223-5234. DOI: https://doi.org/10.1039/C5TA09908K.
Li, M., & Xiao, R. (2019). Preparation of a dual pore structure activated carbon from rice husk char as an adsorbent for CO2 capture. Fuel processing technology, 186, 35-39. DOI: https://doi.org/10.1016/j.fuproc.2018.12.015
Luo, S., Chen, S., Chen, S., Zhuang, L., Ma, N., Xu, T., Li, Q., & Hou, X. (2016). Preparation and characterization of amine-functionalized sugarcane bagasse for CO2 capture. Journal of environmental management, 168, 142-148. DOI: https://doi.org/10.1016/j.jenvman.2015.09.033
Lyubchyk, A. (2013). Gas adsorption in the MIL-53 (Ai) metal organic framework. Experiments and molecular simulation. Universidade NOVA de Lisboa (Portugal),
Mantripragada, H. C., & Rubin, E. S. (2013). Chemical looping for pre-combustion CO2 capture—performance and cost analysis. Energy Procedia, 37, 618-625. DOI: https://doi.org/10.1016/j.egypro.2013.05.149
Mc Cabe, W. L., Smith, J. C., & Harriott, P. (2018). Unit operation of chemical engineering: McGraw-Hill.
Metz, B., Davidson, O., De Coninck, H., Loos, M., & Meyer, L. (2005). IPCC special report on carbon dioxide capture and storage: Cambridge: Cambridge University Press.
Moldenhauer, P., Linderholm, C., Rydén, M., & Lyngfelt, A. (2020). Avoiding CO2 capture effort and cost for negative CO2 emissions using industrial waste in chemical-looping combustion/gasification of biomass. Mitigation and adaptation strategies for global change, 25(1), 1-24. DOI: https://doi.org/10.1007/s11027-019-9843-2
Monforti, F., Bódis, K., Scarlat, N., & Dallemand, J.-F. (2013). The possible contribution of agricultural crop residues to renewable energy targets in Europe: A spatially explicit study. Renewable and sustainable energy reviews, 19, 666-677.
Müller, F., Patel, H., Blumenthal, D., Poživil, P., Das, P., Wieckert, C., Maiti, P., Maiti, S., & Steinfeld, A. (2018). Co-production of syngas and potassium-based fertilizer by solar-driven thermochemical conversion of crop residues. Fuel processing technology, 171, 89-99. DOI: https://doi.org/10.1016/j.fuproc.2017.08.006
Nagendran, R. (2011). Agricultural waste and pollution. Paper presented at the Waste.
Nath, A., Das, K., & Dhal, G. C. (2023). Global Status of Agricultural Waste-Based Industries, Challenges, and Future Prospects. Agricultural Waste to Value-Added Products: Technical, Economic and Sustainable Aspects, 21-45.
Nebojsa, N., Alcamo, J., Davis, G., De Vries, B., Fenhann, J., Gaffin, S., Gregory, K., Grübler, A., Tae, Y., & Kram, T. (2000). IPCC Special Report on Emissions Scenarios: A Special Report of Working Group III of the Intergovernmental Panel on Climate Change. Intergovernmental Panel on Climate Change. DOI: https://escholarship.org/uc/item/9sz5p22f
Nishikawa, E., da Silva, M. G. C., & Vieira, M. G. A. (2018). Cadmium biosorption by alginate extraction waste and process overview in life cycle assessment context. Journal of Cleaner Production, 178, 166-175. DOI: https://doi.org/10.1016/j.jclepro.2018.01.025
Ochedi, F. O., Liu, Y., & Adewuyi, Y. G. (2020). State-of-the-art review on capture of CO2 using adsorbents prepared from waste materials. Process Safety and Environmental Protection, 139, 1-25. DOI: https://doi.org/10.1016/j.psep.2020.03.036
Olajire, A. A. (2010). CO2 capture and separation technologies for end-of-pipe applications–A review. Energy, 35(6), 2610-2628. DOI: https://doi.org/10.1016/j.energy.2010.02.030
Olivier, J., Bouwman, A., Van der Maas, C., & Berdowski, J. (1994). Emission database for global atmospheric research (EDGAR). Environmental Monitoring and Assessment, 31, 93-106.
Opatokun, S. A., Prabhu, A., Al Shoaibi, A., Srinivasakannan, C., & Strezov, V. (2017). Food wastes derived adsorbents for carbon dioxide and benzene gas sorption. Chemosphere, 168, 326-332. DOI: https://doi.org/10.1016/j.chemosphere.2016.10.083
Ouyang, J., Gu, W., Zhang, Y., Yang, H., Jin, Y., Chen, J., & Jiang, J. (2018). CO2 capturing performances of millimeter scale beads made by tetraethylenepentamine loaded ultra-fine palygorskite powders from jet pulverization. Chemical Engineering Journal, 341, 432-440. DOI: https://doi.org/10.1016/j.cej.2018.02.040
Patel, H., Maiti, S., Müller, F., & Maiti, P. (2019). Sustainable methodology for production of potassic fertilizer from agro-residues: Case study using empty cotton boll. Journal of Cleaner Production, 215, 22-33. DOI: https://doi.org/10.1016/j.jclepro.2019.01.003
Patterson, H. (2009). Bleaching of Important fats and oils. In Bleaching and Purifying Fats and Oils (pp. 97-151): Elsevier.
Pérez-Ramírez, J., Christensen, C. H., Egeblad, K., Christensen, C. H., & Groen, J. C. (2008). Hierarchical zeolites: enhanced utilisation of microporous crystals in catalysis by advances in materials design. Chemical Society Reviews, 37(11), 2530-2542. DOI: https://doi.org/10.1039/B809030K
Plaza, M., Pevida, C., Arias, B., Fermoso, J., Casal, M., Martín, C., Rubiera, F., & Pis, J. (2009). Development of low-cost biomass-based adsorbents for postcombustion CO2 capture. Fuel, 88(12), 2442-2447. DOI: https://doi.org/10.1016/j.fuel.2009.02.025
Plaza, M., Pevida, C., Martín, C. F., Fermoso, J., Pis, J., & Rubiera, F. (2010). Developing almond shell-derived activated carbons as CO2 adsorbents. Separation and Purification Technology, 71(1), 102-106. DOI: https://doi.org/10.1016/j.seppur.2009.11.008
Pramanik, P., Patel, H., Charola, S., Neogi, S., & Maiti, S. (2021). High surface area porous carbon from cotton stalk agro-residue for CO2 adsorption and study of techno-economic viability of commercial production. Journal of CO2 Utilization, 45, 101450. DOI: https://doi.org/10.1016/j.jcou.2021.101450
Rashidi, N. A., & Yusup, S. (2017). Potential of palm kernel shell as activated carbon precursors through single stage activation technique for carbon dioxide adsorption. Journal of Cleaner Production, 168, 474-486. DOI: https://doi.org/10.1016/j.jclepro.2017.09.045
Rattanaphan, S., Rungrotmongkol, T., & Kongsune, P. (2020). Biogas improving by adsorption of CO2 on modified waste tea activated carbon. Renewable Energy 145, 622-631. DOI: https://doi.org/10.1016/j.renene.2019.05.104
Rouzitalab, Z., Maklavany, D. M., Jafarinejad, S., & Rashidi, A. (2020). Lignocellulose-based adsorbents: A spotlight review of the effective parameters on carbon dioxide capture process. Chemosphere, 246, 125756. DOI: https://doi.org/10.1016/j.chemosphere.2019.125756
Sahu, N., Shweta, S., Garg, P., Berry, E., Kumar, R., & Kaushik, S. (2024). Agriculture Waste to Wealth: Unlocking the Hidden Potential. In Integrated Waste Management: A Sustainable Approach from Waste to Wealth (pp. 63-89): Springer.
Saleh, T. A. (2021). Protocols for synthesis of nanomaterials, polymers, and green materials as adsorbents for water treatment technologies. Environmental Technology & Innovation, 24, 101821. DOI: https://doi.org/10.1016/j.eti.2021.101821
Sanz, R., Calleja, G., Arencibia, A., & Sanz-Perez, E. S. (2013). CO2 Uptake and Adsorption Kinetics of Pore-Expanded SBA-15 Double-Functionalized with Amino Groups. Energy Fuels, 27, 7637. DOI: https://doi.org/10.1021/ef4015229
Senthilkumaran, M., & Mareeswaran, P. M. (2021). Porous polymers-based adsorbent materials for CO2 capture. In Nanomaterials for CO2 Capture, Storage, Conversion and Utilization (pp. 31-52): Elsevier. DOI: https://doi.org/10.1016/B978-0-12-822894-4.00010-1
Serafin, J., Narkiewicz, U., Morawski, A. W., Wróbel, R. J., & Michalkiewicz, B. (2017). Highly microporous activated carbons from biomass for CO2 capture and effective micropores at different conditions. Journal of CO2 Utilization, 18, 73-79. DOI: https://doi.org/10.1016/j.jcou.2017.01.006
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012). High-performance CO 2 sorbents from algae. RSC advances, 2(33), 12792-12797. DOI: https://doi.org/10.1039/C2RA22552B
Sevilla, M., & Fuertes, A. B. (2011). Sustainable porous carbons with a superior performance for CO 2 capture. Energy & Environmental Science, 4(5), 1765-1771. DOI: https://doi.org/10.1039/C0EE00784F
Shahkarami, S., Azargohar, R., Dalai, A. K., & Soltan, J. (2015). Breakthrough CO2 adsorption in bio-based activated carbons. Journal of environmental sciences, 34, 68-76. DOI: https://doi.org/10.1016/j.jes.2015.03.008
Shi, Y., Chang, Q., Zhang, T., Song, G., Sun, Y., & Ding, G. (2022). A review on selective dye adsorption by different mechanisms. Journal of Environmental Chemical Engineering, 10(6), 108639. DOI: https://doi.org/10.1016/j.jece.2022.108639
Singh, G., Lakhi, K. S., Ramadass, K., Sathish, C., & Vinu, A. (2019). High-performance biomass-derived activated porous biocarbons for combined pre-and post-combustion CO2 capture. ACS Sustainable Chemistry & Engineering, 7(7), 7412-7420. DOI: https://doi.org/10.1021/acssuschemeng.9b00921
Sumathi, S., Bhatia, S., Lee, K. T., & Mohamed, A. R. (2009). Optimization of microporous palm shell activated carbon production for flue gas desulphurization: Experimental and statistical studies. Bioresource Technology, 100(4), 1614-1621. DOI: https://doi.org/10.1016/j.biortech.2008.09.020
Sun, H., Yang, B., & Li, A. (2019). Biomass derived porous carbon for efficient capture of carbon dioxide, organic contaminants and volatile iodine with exceptionally high uptake. Chemical Engineering Journal, 372, 65-73. DOI: https://doi.org/10.1016/j.cej.2019.04.061
Sun, J., Liang, C., Tong, X., Guo, Y., Li, W., Zhao, C., Zhang, J., & Lu, P. (2019). Evaluation of high-temperature CO2 capture performance of cellulose-templated CaO-based pellets. Fuel, 239, 1046-1054. DOI: https://doi.org/10.1016/j.fuel.2018.11.123
Szymańska, A., Skoczek, A., & Przepiórski, J. (2019). Activated carbons from common nettle as potential adsorbents for CO capture. Polish Journal of Chemical Technology, 21(1), 59-66. DOI: https://doi.org/10.2478/pjct-2019-0011
Thote, J. A., Iyer, K. S., Chatti, R., Labhsetwar, N. K., Biniwale, R. B., & Rayalu, S. S. (2010). In situ nitrogen enriched carbon for carbon dioxide capture. Carbon, 48(2), 396-402. DOI: https://doi.org/10.1016/j.carbon.2009.09.042
Vargas, D., Giraldo, L., Erto, A., & Moreno-Piraján, J. (2013). Chemical modification of activated carbon monoliths for CO 2 adsorption. Journal of Thermal Analysis and Calorimetry, 114, 1039-1047. DOI: https://doi.org/10.1007/s10973-013-3086-3
Varghese, A. M., & Karanikolos, G. N. (2020). CO2 capture adsorbents functionalized by amine–bearing polymers: A review. International Journal of Greenhouse Gas Control, 96, 103005. DOI: https://doi.org/10.1016/j.rser.2014.07.093
Viswanathan, B., Neel, P. I., & Varadarajan, T. (2009). Methods of activation and specific applications of carbon materials. India, Chennai, 600(36), 1-160.
Wall, T. F. (2007). Combustion processes for carbon capture. Proceedings of the combustion institute, 31(1), 31-47. DOI: https://doi.org/10.1016/j.proci.2006.08.123
Waribam, P., Ngo, S. D., Tran, T. T. V., Kongparakul, S., Reubroycharoen, P., Chanlek, N., Wei, L., Zhang, H., Guan, G., & Samart, C. (2020). Waste biomass valorization through production of xylose-based porous carbon microspheres for supercapacitor applications. Waste management, 105, 492-500. DOI: https://doi.org/10.1016/j.wasman.2020.02.042
Wei, H., Chen, J., Fu, N., Chen, H., Lin, H., & Han, S. (2018). Biomass-derived nitrogen-doped porous carbon with superior capacitive performance and high CO2 capture capacity. Electrochimica Acta, 266, 161-169. DOI: https://doi.org/10.1016/j.electacta.2017.12.192
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012). Granular bamboo‐derived activated carbon for high CO2 adsorption: the dominant role of narrow micropores. ChemSusChem, 5(12), 2354-2360. DOI: https://doi.org/10.1002/cssc.201200570
Xie, J., Yan, N., Liu, F., Qu, Z., Yang, S., & Liu, P. (2014). CO 2 adsorption performance of ZIF-7 and its endurance in flue gas components. Frontiers of Environmental Science & Engineering, 8, 162-168. DOI: https://doi.org/10.1007/s11783-013-0507-2
Xing, W., Liu, C., Zhou, Z., Zhang, L., Zhou, J., Zhuo, S., Yan, Z., Gao, H., Wang, G., & Qiao, S. Z. (2012). Superior CO 2 uptake of N-doped activated carbon through hydrogen-bonding interaction. Energy & Environmental Science, 5(6), 7323-7327. DOI: https://doi.org/10.1039/C2EE21653A
Xu, X., Kan, Y., Zhao, L., & Cao, X. (2016). Chemical transformation of CO2 during its capture by waste biomass derived biochars. Environmental pollution, 213, 533-540. DOI: https://doi.org/10.1016/j.envpol.2016.03.013
Xu, X., Song, C., Andresen, J., Miller, B., & Scaroni, A. (2003). Preparation and characterization of novel CO2 “molecular basket” adsorbents based on polymer-modified mesoporous molecular sieve MCM-41. Microporous and Mesoporous Materials, 62, 29-45. DOI: https://doi.org/10.1016/S1387-1811(03)00388-3
Yang, Y., Liu, W., Hu, Y., Sun, J., Tong, X., Chen, Q., & Li, Q. (2018). One-step synthesis of porous Li4SiO4-based adsorbent pellets via graphite moulding method for cyclic CO2 capture. Chemical Engineering Journal, 353, 92-99. DOI: https://doi.org/10.1016/j.cej.2018.07.044
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018). CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell. Journal of colloid and interface science, 511, 259-267. DOI: https://doi.org/10.1016/j.jcis.2017.09.040
Zainab, G., Iqbal, N., Babar, A. A., Huang, C., Wang, X., Yu, J., & Ding, B. (2017). Free-standing, spider-web-like polyamide/carbon nanotube composite nanofibrous membrane impregnated with polyethyleneimine for CO2 capture. Composites Communications, 6, 41-47.
Zhan, Y., Han, Q., Pan, S., Kan, X., Mi, J., Liu, F., Cao, Y., Au, C., & Jiang, L. (2019). Biomass-derived hierarchically porous carbons abundantly decorated with nitrogen sites for efficient CO2 catalytic utilization. Industrial & Engineering Chemistry Research, 58(19), 7980-7988. DOI: https://doi.org/10.1021/acs.iecr.9b00981
Zhang, S., Zhou, Q., Jiang, X., Yao, L., Jiang, W., & Xie, R. (2020). Preparation and evaluation of nitrogen-tailored hierarchical meso-/micro-porous activated carbon for CO2 adsorption. Environmental technology, 41(27), 3544-3553. DOI: https://doi.org/10.1080/09593330.2019.1615131
Zhang, X., Zhang, S., Yang, H., Feng, Y., Chen, Y., Wang, X., & Chen, H. (2014). Nitrogen enriched biochar modified by high temperature CO2–ammonia treatment: characterization and adsorption of CO2. Chemical Engineering Journal, 257, 20-27. DOI: https://doi.org/10.1016/j.cej.2014.07.024
Zhang, Y., Chi, Y., Zhao, C., Liu, Y., Zhao, Y., Jiang, L., & Song, Y. (2018). CO2 Adsorption Behavior of Graphite Oxide Modified with Tetraethylenepentamine. Journal of Chemical & Engineering Data, 63(1), 202-207. DOI: https://doi.org/10.1021/acs.jced.7b00824
)