Improving the Mechanical Properties of Soil and Foundations Through Synthesis of Diatomite, Mica, and Fly Ash-Based Geopolymer
Document Type : Research Paper
Authors
- Departement of Engineering, Faculty of Civil Engineering, University of Zanjan, Zanjan, Iran
Abstract
This study aimed to improve the mechanical properties of soil and foundations through geopolymer synthesis. The soil used in this research was wind-blown sand exposed to erosion. To examine the mechanical properties of the soil, laboratory tests were conducted, including Atterberg limits, soil permeability coefficient, sand equivalent value, soil pH, optimum moisture content, unconfined compressive strength (UCS), and particle size distribution. The results indicated that the uniformity coefficient (Cu) and curvature coefficient (Cc) were 2.5 and 1.23, respectively, classifying the soil as poorly graded. Based on the soil’s silt and clay content, it was classified as sand. The particle size distribution test showed that 5% of the soil passed through the No. 200 sieve. Hence, the soil is coarse-grained and poorly graded. The soil density was determined to be 2.65 g/cm³, confirming that the soil is sandy and quartzitic, and due to its lack of cohesion, it exhibits zero compressive strength. The permeability coefficient was 1×10⁻³ cm/s, the sand equivalent value was 79%, and the soil pH was 7.7. The geopolymer sample with diatomite exhibited the highest strength.The key factor in the geopolymerization process is SiO₂, and with strength comparable to cement, it is a suitable alternative to reduce the environmental impact of cement production.
Keywords
Subjects
environment
Almadani, M., Razak, R. A., Abdullah, M. M. A. B., & Mohamed, R. (2022). Geopolymer-based artificial aggregates: A review on methods of producing, properties, and improving techniques. Mater., 15(16), 5516. 10.3390/ma15165516
Andrade-Linares, D. R., Zistl-Schlingmann, M., Foesel, B., Dannenmann, M., Schulz, S., & Schloter, M. (2021). Short term effects of climate change and intensification of management on the abundance of microbes driving nitrogen turnover in montane grassland soils. Sci. Total Environ., 780, 146672. 10.1016/j.scitotenv.2021.146672
Bamutaze, Y., Meadows, M. E., Mwanjalolo, M., & Musinguzi, P. (2021). Effect of land use systems and topographical attributes on the condition of surface soil physicochemical properties in a highland catchment of the Lake Victoria Basin, Uganda. Catena, 203, 105343. 10.1016/j.catena.2021.105343
Burst, M., Chauchard, S., Dambrine, E., Dupouey, J. L., & Amiaud, B. (2020). Distribution of soil properties along forest-grassland interfaces: Influence of permanent environmental factors or land-use after-effects? Agri. Ecosyst. Environ., 289, 106739. 10.1016/j.agee.2019.106739
Dassekpo, J. B. M., Zha, X., & Zhan, J. (2017). Compressive strength performance of geopolymer paste derived from Completely Decomposed Granite (CDG) and partial fly ash replacement. Construct. Build. Mater., 138, 195-203. [In Persian].
Dibamehr, A., Behrouzsahand, F., & Wafai Poursarkhabi, R. (2023). Improvement of Tabriz Green Marl Using Alkaline Activated Zeolite and Metaclay. J. Civil Environ. Eng., 53(113), 24-35. [In Persian].
El Alouani, M., Saufi, H., Aouan, B., Bassam, R., Alehyen, S., Rachdi, Y., El Hadki, H., El Hadki, A., Mabrouki, J., Belaaouad, S., Ez Zaki, H., & Barka, N. (2024). A comprehensive review of synthesis, characterization, and applications of aluminosilicate materials-based geopolymers. Environ. Adv., 100524. 10.1016/j.envadv.2024.100524
Khadka, S. D., Jayawickrama, P. W., Senadheera, S., & Segvic, B. (2020). Stabilization of highly expansive soils containing sulfate using metakaolin and fly ash based geopolymer modified with lime and gypsum. Transportation Geotechnics, 23, 100327. 10.1016/j.trgeo.2020.100327
Li, J. S., Xue, Q., Wang, P., & Liu, L. (2013). Influence of leachate pollution on mechanical properties of compacted clay: a case study on behaviors and mechanisms. Eng. Geol., 167, 128-133. 10.1016/j.enggeo.2013.10.013
Luo, Y., Meng, J., Wang, D., Jiao, L., & Xue, G. (2022). Experimental study on mechanical properties and microstructure of metakaolin based geopolymer stabilized silty clay. Construct. Build. Mater., 316, 125662. 10.1016/j.conbuildmat.2021.125662
Nikkhah Shahmirzadi, M., Arabi, G., & Hafezi, M. Z. (2024). Comparison of liquid limit obtained from casagrande cup method and cone penetrometer for sand and clay mixed soils. J. Civil Environ. Eng., 54.1(114), 190-200. 10.22034/ceej.2023.54157.2200 [In Persian].
Nurruddin, M. F., Sani, H., Mohammed, B. S., & Shaaban, I. (2018). Methods of curing geopolymer concrete: A review. Int. J. Adv. Appl. Sci., 5(1), 31-36. 10.21833/ijaas.2018.01.005
O’Kelly, B. C., & Nogal, M. (2020). Determination of soil permeability coefficient following an updated grading entropy method. Geotech. Res., 7(1), 58-70. 10.1680/jgere.19.00036.
Raisi, Z., Nematollahi, A., Sharifi Rad, M. J., Ebrahimi, A. M., & Mohammadi, S. B. (2021). Investigation and prediction of soil saturation percentage (S.P) of urban green space soil using geostatistics technique (case study: region No Shiraz Municipality), 11th National Conference of Geography and Environment, Shirvan.[In Persian].
Rajabi, A. M., & Hamrahi, Z. (2019). Evaluation of the uniaxial compression strength and Atterberg limits of metakaolin-treated sandy clay soil. Sci. Quart. J. Iran. Assoc. Eng. Geol., 12(1), 19-31. [In Persian].
Sahlabadi, S. H., Bayat, M., Mousivand, M., & Saadat, M. (2023). Effect of Basalt and Polypropylene Fibers on Unconfined Compressive Strength of a Cement-Stabilized Clay Soil. Quart. J. Transport. Eng., 14(3), 2611-2624. [In Persian]. 10.22119/jte.2020.120821
Shabani, K., Bahmani, M., Fatehi, H., & Chang, I. (2022). Improvement of the geotechnical engineering properties of dune sand using a plant-based biopolymer named serish. Geomech. Eng., 29(5), 535-548. 10.12989/gae.2022.29.5.535
Shi, X. S., & Zhao, J. (2020). Practical estimation of compression behavior of clayey/silty sands using equivalent void-ratio concept. J. Geotech. Geoenviron. Eng., 146(6), 04020046. 10.1061/(ASCE)GT.1943-5606.0002267
Shooshpasha, I., & Shirvani, R. A. (2015). Effect of cement stabilization on geotechnical properties of sandy soils. Geomech. Eng., 8(1), 17-31. 10.12989/gae.2015.8.1.017
Simatupang, M., Mangalla, L. K., Edwin, R.S., Putra, A. A., Azikin, M. T., Aswad, N. H., & Mustika, W. (2020), The mechanical properties of fly-ash-stabilized sands. Geosci., 10(4), 132. 10.3390/geosciences10040132
Singhi, B., Laskar, A. I., & Ahmed, M. A. (2016). Investigation on soil–geopolymer with slag, fly ash and their blending. Arab. J. Sci. Eng., 41, 393-400. 10.1007/s13369-015-1677-y
Soltani, A., & O’Kelly, B. C. (2021). Reappraisal of the ASTM/AASHTO standard rolling device method for plastic limit determination of fine-grained soils. Geosci., 11(6), 247. 10.3390/geosciences11060247
Song, Y., Wang, J. Q., Chen, X. J., Yu, S. Z., Ban, R. L., Yang, X., Zhang, X., & Han, Y. (2022). Study the effects of dry-wet cycles and cadmium pollution on the mechanical properties and microstructure of red clay. Environ. Pollut., 302, 119037. 10.1016/j.envpol.2022.119037
Songara, J. C., & Patel, J. N. (2022). Calibration and comparison of various sensors for soil moisture measurement. Measure., 197, 111301. 10.1016/j.measurement.2022.111301
Tadayonfar, G. (2024). Evaluation of Shear Strength of Loose Sand Soils Enriched with Waste Ash of Sabzevar Cement Factory. Road, 32(118), 253-264. 10.22034/road.2023.337968.2040 [In Persian].
Uddin, M. N., Saraswathy, V., & Elumalai, P. (2015). An experimental investigation of red soil based geopolymer mortar without Portland cement. Int. J. Sci. Eng. Res., 6(5), 1722-1732.
Wang, S., Xue, Q., Ma, W., Zhao, K., & Wu, Z. (2021). Experimental study on mechanical properties of fiber-reinforced and geopolymer-stabilized clay soil. Construct. Build. Mater., 272, 121914. 10.1016/j.conbuildmat.2020.121914
Yang, Z., Li, X., Li, D., Wang, Y., & Liu, X. (2020). Effects of long-term repeated freeze-thaw cycles on the engineering properties of compound solidified/stabilized Pb-contaminated soil: deterioration characteristics and mechanisms. Int. J. Environ. Res. Public Health, 17(5), 1798. 10.3390/ijerph17051798
Zhang, M., Guo, H., El-Korchi, T., Zhang, G., & Tao, M. (2013). Experimental feasibility study of geopolymer as the next-generation soil stabilizer. Construct. Build. Mater., 47, 1468-1478. 10.1016/j.conbuildmat.2013.06.017
Zhao, S., Zhang, B., Zhang, W., Su, X., & Sun, B. (2023). Impacts of contaminants from different sources on geotechnical properties of soils. Sustain., 15(16), 12586. 10.3390/su151612586
Zheng, Y., Zhang, Y., Wan, D., Han, S., Duan, M., & Yang, H. (2019). Experimental study on physical and mechanical properties of expansive soil polluted by heavy metals. In IOP Conference Series: Earth Environ. Sci., 218(1), 012022. IOP Publishing. 10.1088/1755-1315/218/1/012022
)